How to Make a Floating Tap Water Fountain 2026

In this article, I will show you how to make a floating tap water fountain, a DIY project that you may definitely like. I saw this fountain a year ago and really wanted to make one for my backyard.

Although it seems like a complex project, it is actually very easy and doesn't take long to build. So, follow my instructions and create your own magical faucet fountain that will amaze everyone around you.

Video on how to make a water fountain:

Click to see the Video.

Step 1: Basic materials needed for this project

Materials to make a water fountain:

• Rustic galvanized metal ladle
• Water tap
• Rigid acrylic tubing
• Water pump
• White pebbles

Tools:

• Soldering station
• Cordless drill
• Drilling Bit Set
• Glue gun
• 5 minute epoxy

For this project I bought a rustic galvanized metal bucket, but you can use any other type of waterproof container. It can be rustic or modern, metal or plastic, bigger or smaller, it's all up to you.

Also, I choose white river rocks to fill the bucket. Other options are black rocks, clear glass stones, colored glass stones, whatever works for you.

The most important thing you need for this project is a clear plastic/acrylic tube. Remember, you need rigid pipe, not flexible. You can find the link to it in the list of tools and materials above.

Next is the water pump. I have a submersible water pump, which is quiet and very easy to install, so I recommend purchasing one for this type of project.

Finally, I found a cool looking faucet or spigot. When you buy one, make sure the end of the hose fits into the plastic tube.

Step 2: Make a hole in the bottom of the bucket

Now, let's get started on this project!

The water pump goes to the bottom of the bucket. To hide the cable, I need to drill a hole in the back of the hub and run the cable through.

I took my cordless drill, attached a 6mm drill bit and drilled that hole easily.

If your pump comes with a plug on the end of the cable, you will have two options: drill a much larger hole in the hub, or cut the cable, and solder it back on later. You decide.

Step 3: Add a jacket to the pump cables

The pump has two exposed wires, black and red without a cover, so I decided to cover them with black shrink tubing. The wires are 46 cm long, but I cut 44 cm of the heat shrink and left 2 cm of the wires exposed, which I will use later.

I covered the wires and used a lighter to shrink all the heat shrink. I think it looks much better now.

This step is optional. You may have another type of pump, so you won't have to do anything with it.

Step 4: Soldering

Once I was done with the cable, I placed the pump on the bottom of the bucket and pulled the cable through the hole.

I added another heat shrink piece to the end of the cabsles, which will protect the exposed cables later.

Next, I stripped the insulation off the black wire just a little more with the wire strippers. Now the wires are ready to solder to the power connector.

First, I soldered the red wire to the shorter tip of the DC power plug, and then I soldered the black wire to the longer tip of the DC power plug.

Finally, I shrunk the short heat shrink piece to insulate the wires connection to the power connector.

Step 5: Drill holes in the rigid acrylic tubing

I bought this clear rigid acrylic tube a year ago, not knowing I would make such an amazing project with it. It has a length of 50 cm and an outer diameter of 20 mm. Maybe a thinner tube could create a better effect, but why not use something I already have in my workshop?

To get the desired effect, I need to drill small holes in the top of the tube. That way, the water can flow easily, first going all the way up and then going down the tube.

So, I drilled 8 holes in total with a 3mm drill bit, making sure they are really close to the top (about 3mm apart) and the same distance apart.

The drilling process created some burrs in the acrylic, which I removed with sandpaper. I hand sanded inside and out as well. This step will help make a strong bond with the glue.

Step 6: Placing the faucet on the acrylic tube

My glue choice is two part epoxy. I mixed the epoxy well and applied a large amount of it into the faucet. The sides of the faucet should not be covered with glue, because there we need to have enough space for the water to come out of the holes.

I placed the tube in the faucet and waited about 10 minutes to dry completely, before moving on to the next step.

Step 7: Placing the acrylic tube on the water pump

The other end of the tube should go above the pump. The pump nozzle is too small for the tube, but I think hot glue will fix this problem.

So, I applied a generous amount of hot glue around the nozzle and tied off the tube while the glue was still hot. I then applied hot glue to the outside as well. In this way, I will make a strong connection between the tube and the pump nozzle, and the water will not leak, which is very important.

Step 8: Adding Natural River Rocks to the Cube

Before adding the rocks, I placed the tube in the center of the cube.

I bought about 20kg of natural river rocks, which is enough for this big bucket. Holding the tube with one hand, I began piling the rocks into the bucket with the other hand. The rocks keep everything in place and give the project character.

Step 9: Connecting the pump to the power source

EverythingIt's in the right position so I can seal the hole where the cable goes through. I used hot glue to seal that hole.

Once this is done, I can connect the power connector with a 12V DC power adapter. If you have another type of water pump, you may not need to use a power adapter.

This means that I have finished mounting the font.

Step 10: Add some water to the bucket

The last step is to add water to the bucket. How much water you add depends on the pump, but mostly on your taste. I added enough water to cover the pump and make sure it works properly.

Then I connected the pump and waited to see the final result.

And my project was a success. The water rose, began to flow along the sides through the holes, creating the illusion of a floating faucet.

It came out wonderful! And the sound of flowing water is absolutely incredible!

Step 11: Enjoying the magic tap fountain

Don't forget to watch the video for the full experience! Also remember that you can make a floating tap water fountain easily and in the comfort of your home.

What do you think? I'd like you to share your thoughts with me in the comments below!

Source: https://creativityhero.com/

Creative Home Decor Ideas to Transform Every Space

Refreshing your home starts with smart design choices that combine comfort, personality, and functionality. Whether you want to modernize a small apartment, upgrade outdoor areas, or create cozy rustic interiors, these trending ideas can completely change the atmosphere of your space.

Outdoor Spaces That Increase Style and Functionality

Outdoor living continues to dominate modern home trends. Homeowners are increasingly investing in practical entertainment zones inspired by these BBQ shed ideas, which create the perfect setup for gatherings and weekend cooking sessions.

First impressions also matter when designing exteriors. Elegant farm entrance gates design ideas help properties stand out while improving privacy and curb appeal.

Compact living solutions are also gaining popularity. These inspiring 16x40 shed house interior design ideas show how smaller spaces can still feel luxurious and functional.

To enhance patios and entryways, homeowners are adding stylish protection with these creative porch awning exterior DIY ideas that blend aesthetics with practicality.

Rustic and Cozy Interior Design Trends

Warm and natural interiors remain timeless. These charming rustic decor ideas combine wood textures, vintage accents, and earthy tones to create welcoming spaces.

Bedrooms are becoming more personalized with curated wall arrangements. Many homeowners use these stylish picture wall ideas for bedroom spaces to display memories and artwork creatively.

Textured wall treatments are another major trend. Installing a board and batten wall adds architectural character while keeping interiors elegant and modern.

Similarly, bold accent wall ideas can instantly transform plain rooms into eye-catching focal points without requiring a full renovation.

Smart Kitchen and Organization Inspiration

Functional kitchens are essential for modern homes. These practical kitchen wall cabinet ideas maximize storage while maintaining a clean and stylish appearance.

Organization also starts at the entrance. Well-designed mud room ideas help families keep shoes, coats, and daily essentials neatly arranged.

Colorful and Personalized Home Styling

Vibrant interiors are becoming increasingly popular thanks to playful dopamine decor ideas that use bright colors and joyful accessories to improve mood and energy.

Gallery walls also continue to evolve as a major decorative feature. These trendy gallery wall inspiration ideas offer creative ways to combine prints, photos, and statement art.

Young renters and new homeowners are especially embracing these stylish first apartment aesthetic ideas to create sophisticated interiors on a budget.

Finally, selecting the right shades can dramatically influence any room’s atmosphere. These modern trendy color ideas help homeowners choose palettes that feel fresh, elegant, and timeless.

Final Thoughts

From rustic charm and colorful interiors to outdoor entertaining areas and functional storage solutions, today’s home decor trends focus on creating spaces that feel both beautiful and livable. By combining smart layouts, modern textures, and personalized decorative elements, any home can become more stylish, comfortable, and inspiring.